glassy carbon mold for glass press molding upto 2000° C
glassy carbon mold for glass press molding upto 2000° C
Introduces the development of glassy carbon mold, which is 99.2% carbon, capable of glass press molding with high melting point glass upto 2000 ° C.
In the past, the lens was thermoformed with low melting glass material by using DLC (Diamond-like carbon) to increase the heat resistance of the Tungsten-Carbide mold. At this time, cracks occur because the coefficient of thermal expansion of the mold and that of carbon are different.
The glassy carbon mold developed is made up of 99.2% carbon, which enables glass press molding from 800 ° to 2000 °. Therefore, high melting point glass materials (BK7, borosilicate, fused silica, etc.) can be used. It is suitable for NIR, PIR, IR laser, IR sensor which are difficult to polymer because of using high melting point glass material. Finally, copying is possible and production costs are low due to low mold costs.
The following is a comparison table.
| Material | Heat-resistant temperature(°C) |
Possible lens material |
Production method |
Mold cost | |
| Glassy carbon mold |
carbon 99.2% | below 2000 | BK7, Borosilicate, fused silica |
glass press molding |
cheap |
| Carbide mold +DLC (Diamond-like carbon) |
Tungsten-Carbide +carbon coating |
below 600 | low-melting -point Glass |
glass press molding |
more expensive |
Fresnel Factory Korea is an optical company specializing in fine patterns, developing and manufacturing precision optical lenses, Fresnel lenses, MLA and lenticular lenses and optical molds.
We recommend the suitable lens producing method and material according to the customer's application.
--
Ashton Myung Joong KIM
CEO of FresnelFactory Inc.
USA : +1 415 779 5317
CEL : +82 10-5248-4630
Ashton@fresnelfactory.com